MTA Hanoi is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC’s registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726

Seminar: 3D Metal Printing


This special topic of “3D Metal Printing From Potential To Application Reality For Professional Manufacturing In Vietnam” gathers experts and engineers from domestic and abroad to exchange information and knowledge about a trendy development direction of 3D Metal Printing. In this event, not only knowledge, viewpoints are expressed but case studies are also reported and analyzed to gain various insights about the field. At the same time, the discussion with experts have long-term experience in the profession promises to bring many interesting experiences for attendees.

❤️ Organizer: Informa Markets Vietnam.

⏰ Time: 09:00 – 17:00 ngày 13/10/2022.

? Location: Seminar room, ICE, 91 Tran Hung Dao, Hoan Kiem, Hanoi, Vietnam.

??? Click HERE to register with some easy steps.

09h00 – 09h20Check-in
09h20 – 09h30Opening
09h30 – 10h053D printing metal technology SLM technology
Practical applications and potentials, development opportunities in Vietnam
MSc. Hoang Duc Bang – AIE CEO  
10h05 – 10h40Metal 3D printing application in simulation calculation Automotive & Aerospace
Mr. Tran Quang Tung – Thinksmart HN manager  
Mr. Le Hoai Thanh – Technical Manager | Altair Engineering
10h40 – 10h50Tea break
10h50 – 11h25Potential and application of Metal 3D Printing to reduce cost and increase profit for Plastic molding industry
Dr. Dau Van Huan – Vinnotek  
11h25 – 12h00Application of Machine Learning algorithms for optimization of SLM 3D printing parameters
Dr. Nguyen Dinh Son (POSTECH)  
14h00 – 16h00On-site consulting with experts on applying 3D printing technology in reality
Questions, difficulties, implementation experience, sharing secrets, success stories, failure lessons. 
Dr. Nguyen Dinh Son (POSTECH)
Dr. Dau Van Huan – Vinnotek
MSc. Hoang Duc Bang – AIE CEO
Mr. Tran Quang Tung – Thinksmart HN manager
Mr. Le Hoai Thanh – Technical Manager | Altair Engineering 
16h00 – 16h10Closing


MSc. Hoang Duc Bang
Mr. Hoang Duc Bang is the chairman and founder of Tan Tien Industrial and Educational Equipment Co., Ltd (AIE), a leading company in the field of 3D technology in Vietnam since 2005. Before establishing AIE, Mr. Bang held the position of Vice Dean of the Faculty of Mechanical Engineering, and Director of the Center for Mechanical Science and Technology at Water Resources University, Hanoi. Mr. Hoang Duc Bang has over 20 years of experience in consulting and providing industrial 3D printer equipment solutions including FDM, CFF, SLA, and SLM to the world’s leading 3D printer manufacturers such as Markforged, and SLM. Solutions, Stratasys, Uniontech, etc.

Mr. Tran Quang Tung
Thinksmart HN
Mr. Tran Quang Tung has over 8 years of experience in technical consulting for 3D printing application solutions, Buck prototyping, and QC for factories of automobile corporations and large manufacturing groups in Vietnam. He has participated in Buck prototyping projects, 3D printer commercial and service provision consultancy, and implemented heavy industrial QC projects for corporations including Vinfast, Thaco, Cannon, Vinfast, Hoa Phat, Filter Nghi Son Petrochemical,…. In addition, he also works with major universities across the country to consult and apply simulation analysis for training, scientific research, and implementation of real projects. From 2005-2012, he participated in network development at Viettel. From 2012 to the present, he worked as a Director in Hanoi of ThinkSmart Group.

Mr. Le Hoai Thanh
Technical Manager
Altair Engineering
Mr. Le Hoai Thanh has over 20 years of research and works in the field of digital design. He has been involved in many projects for Hyundai/GM automotive and Samsung/LG electronics. From 2011-2013 he worked at Hitachi System Singapore as a technical consultant for Siemens. Since 2013, he has been working at Altair Southeast Asia and is currently the Technical Director at Altair Vietnam.

Dr. Dau Van Huan
Dr. Dau Van Huan graduated with a Ph.D. in Robotics from the National University of Singapore (NUS). After graduating, he worked for ASMPT and KLA-Tencor corporations in Singapore, specializing in machine design for the semiconductor industry (chip manufacturing). In 2018, settled in Australia and started working in metal 3D printing for Titomic company in Melbourne. Then, joined AREVO company as Senior Manager, Advanced Manufacturing, and returned to Vietnam to build a team and start manufacturing 3D printers (carbon fiber composite materials) in Vietnam. Then, established Vinnotek Creative Technology Co., Ltd (in 2021) specializing in technology solutions, especially 3D printing technology.

Dr. Nguyen Dinh Son
Mr. Nguyen Dinh Son graduated with a Ph.D. in Mechanical Engineering, majoring in Metal 3D Printing with Selective Laser Melting technology at Ulsan University, Korea. After graduating, Mr. Son did post-doctoral research at the Korea Advanced Institute of Science and Technology – KAIST, one of the leading research institutes in Korea. Currently, Mr. Son is doing post-doctoral research at the Faculty of Mechanical Engineering, Pohang University of Science and Technology- POSTECH, Korea.
Mr. Son has over 7 years of experience in researching, working, and developing metal 3D printers with Selective Laser Melting (SLM), Powder Bed Fusion (PBF), and Powder-based Directed Energy Deposition (DED) technology. Mr. Son has 7 patents registered in Korea, and 1 patent registered in the US.
Let’s welcome the return of MTA Hanoi 2022 – The leading exhibition on precision mechanics and metal processing industry in the North. Here, the latest products, solutions and technologies are introduced by exhibitors, creating more opportunities to approach customers and potential suppliers. The exhibition is also a platform to connect and communicate between regional and international businesses in the industry to update the latest industry trends. Beyond that, there will be presentations from leading industry experts, from which you can update industry knowledge and enhance experience at the exhibition.
Exhibition date: October 12 – 14, 2022    Opening hours: 9:00 – 17:00 daily
Venue: ICE Events – Hanoi International Center for Exhibition, 94 Tran Quoc Toan, District Hoan Kiem, Ha Noi, Vietnam
Contact Information: Mr. Kingsley
Tel: +84 28 3622 2588
Email: [email protected]
Share this post

You may be interested in

Business environment reform is the most efficient support for enterprises
In the face of domestic and international economic difficulties, the most effective support for...
Applying science and technology to improve the quality of medical examination and treatment
Determining the application of scientific-technical advances and modern technologies to improve...
Pioneering team in building and operating smart factories at Samsung
Samsung Electronics Vietnam (SEV) factory has a factory area of nearly 100 hectares, the...
Hanoi aims to develop 950 supporting industry enterprises
In 2023, Hanoi strives to have about 950 enterprises operating in the fields of supporting...
Enterprises in industrial zones: Quickly stabilize production after the Lunar New Year
According to the Hai Phong Economic Zone Authority, most businesses in industrial zones have...
Application of Infineon semiconductor components in automobile manufacturing
Infineon semiconductor components include sensors, and microcontrollers… to help control...
The engineering and manufacturing industry continues to be the spotlight of the economy
Vietnam’s engineering and manufacturing industry in the first nine months of 2022 increased...
Seminar: Digital Design
The theme of “Digital Design – Solutions To Improve Working Efficiency, Shorten The...
Seminar “Digital Design – Solutions To Improve Working Efficiency, Shorten The Project Progress And Save Costs”
The theme of Digital Design and application solutions has gathered top experts and engineers from...
Seminar: Smart Manufacturing
The theme of “Towards Smart Manufacturing Based On AI Technology, Robots And Comprehensive...

Subscribe to Our eNewsletters

    Đặt Gian Hàng
    Đăng Ký Tham Quan Trực Tuyến
    Đăng Ký Tham Quan Theo Đoàn